Owner's manual

Central Control Instruction

(For Screens with Integrated Control)

Integrated control 6P6C

There are 2 individual functions, RS-232 and Dry Contact.

6P6C:

COM

TOP

DOWN

Dry contact

232 D+

232 D-

COM

STOP

DOWN

Dry contact

PAGE 1
Central Control Instruction (For Screens with Integrated Control) Integrated control 6P6C There are 2 individual functions, RS-232 and Dry Contact.
PAGE 2
RS232 Setting：： Bit rate：2400, Date bit：8 digit, Odd-even check：none Stop digit：1 Control protocol: UP：0xff,0xee,0xee,0xee,0xdd STOP: 0xff,0xee,0xee,0xee,0xcc DOWN: 0xff,0xee,0xee,0xee,0xee MICRO-UP: 0xff 0xee, 0xee, 0xee, 0xc9 MICRO-DOWN: 0xff, 0xee, 0xee, 0xee, 0xe9 Remark： 1、 If the screen is not functioning accordingly after RS232 is plugged in, please reverse those 2 wires.