SDS

Safety Data Sheet
Page 2 of 6
Revision date: 08/14/2015
SECTION 4: First Aid Measures
Inhalation: If affected by fumes from heated material, remove from source of exposure and move to
fresh air. Get medical attention
Skin contact: If burned by contact with hot material, flush skin immediately with large amounts of cold
water. If possible, submerge area in cold water. No attempt should be made to detach the
polymer adhering to the skin or to remove clothing attached with molten material. Thermal
burns require immediate medical attention. Cold Material: Wash with soap and water.
Eye contact: If burned by contact with hot material, immediately flush eyes with plenty of water.
Continue to rinse for at least 10 minutes. Get medical attention if irritation occurs.
Ingestion: Seek medical attention if pain develops.
SECTION 5: Fire Fighting Measures
Flamibility of Product: May be combustible at high temperature
Flash Point: >650°F
Auto Igition: >650°F
Extinguishing: Use dry chemical powder, water spray (fog) or foam
Hazardous thermal: Carbon dioxide, carbon monoxide. May also contain low levels of acrolein,
Decomposition aldehydes, organic vapors or hydrocarbons
Special protective equipment: Fire-Fighters should wear appropriate protective equipment and
for fire-fighters self-contained breathing apparatus (SCBA)