User Manual

TBT-T100IN 31082 V3
Operating Manual Page 2
www.grantinstruments.com
Contents
Contents 2
1.0 Use of products 3
2.0 How to use this operating manual 3
3.0 Safety information 4
3.1 Safety compliance 4
3.2 Safety symbols 4
4.0 Operating instructions 5
4.1 Unpacking instructions 5
4.2 Fitting controller to the tank 5
4.3 Removing the controller from the bridge plate 5
4.4 Recommended liquids 6
4.5 Installation 6
4.6 Electrical supply 6
5.0 Operating procedures 7
5.1 Operation 7
5.1.1 Constant level device 7
5.1.2 Filling the tank 7
5.1.3 Emptying the TBT tank 7
5.1.4 Setting up and switching on 7
5.2 Using the T100IN 8
5.2.1 Product description 8
5.2.2 Product indicators 8
5.2.3 Setting the control temperature 9
5.2.4 Configuring a preset 9
5.2.5 Running a bath preset 9
5.2.6 Completing a calibration 10
5.2.7 Restoring factory calibration settings 11
5.2.8 Adjusting display brightness 11
6.0 Technical specifications 12
6.1 Operating conditions 12
6.2 Electrical details 12
6.3 Product performance 12
7.0 Technical Tips 12
7.1 Which water should you use in your bath? 12
7.2 How to prevent rust in water baths 13
7.3 How to prevent algae and bacteria? 13
8.0 Warranty information 14
9.0 Maintenance and service 14
9.1 Routine maintenance 14
9.2 Cleaning 14
9.3 Fuses 14
9.5 Routine safety tests 14
9.6 Service 14
10.0 Optional accessories 15
11.0 Troubleshooting 16
12.0 Contact Grant Instruments 18
13.0 Compliance 18