Manual

XUBA Series 29667 V1
Operating Manual
4
Fill Line
Quick guide
Pour cold water into the bath so that it reaches the
minimum tank fill line (but does not go over the
maximum fill line).
Add the required dose of detergent (see page 10).
Operate the ultrasonics by turning the timer dial to
the required time and pressing the SONICS button
(where applicable).
Operate the heater, if the bath has a heating func-
tion, by turning the heater dial to the required tem-
perature and pressing the HEAT button.
Turn on the ultrasonics for approximately 5-10 min-
utes to degas the cleaning liquid. (See page 8 for
more details on degassing).
The bath is now ready to use.
At the end of the cycle, remove the basket from the
bath and rinse the items under clean running water.
The lid can be inverted and the basket placed on top
to catch excess fluid as the items dry.
Please refer to the following pages in this manual for more detailed instructions.
Change the cleaning liquid at regular intervals. Your cleaning process will determine
how often to change the liquid  the more soiled your items, the more often you will
need to change the liquid.
Grant recommends changing the cleaning liquid at least on a daily basis.