Installation Guide

Sources: American Wood Council, NDS 2005, Table 11.2 A, 11.3.2 A
Notes:
1) Thread must be embedded in a rafter or other structural roof member.
2) See IBC for required edge distances.
IMPORTANT: To maintain waterproong it is important that the aluminum ashing (item 1) is properly placed under one full course above the mounting block with at least 1/2" of the ashing
extending up under an additional course above (3rd course). The bottom of the ashing should never overhang the shingle drip edge. See instructions on back.
Lag pull-out (withdrawal) capacities (lbs) in typical lumber:
Lag Bolt Specications
Specic Gravity 5/16" shaft per 3" thread depth 5/16" shaft per 1" thread depth
Douglas Fir, Larch .50 798 266
Douglas Fir, South .46 705 235
Engelmann Spruce, Lodgepole Pine (MSR 1650 f & higher) .46 705 235
Hem, Fir .43 636 212
Hem, Fir (North) .46 705 235
Southern Pine .55 921 307
Spruce, Pine, Fir .42 615 205
Spruce, Pine, Fir (E of 2 million psi and higher grades of MSR and MEL) .50 798 266
Classic Composition Mount QMSC
8
3
7
4
2
1
5
6
RACKING COMPONENTS
NOT INCLUDED
12.00
12.00
6.00
3.00
2.50
1.50
THIS EDGE TOWARDS
ROOF RIDGE
3.00
1.30
AVAILABLE IN MILL, CLEAR ANODIZED,
AND DARK BRONZE ANODIZED FINISHES
ITEM
NO.
DESCRIPTION
QTY.
1
FLASHING, 12" X 12" X .050", 5052, MILL
1
2
QBLOCK, CLASSIC, A360.1 CAST AL, MILL
1
3
HANGER BOLT, 5/16" x 6", 18-8 SS
1
4
WASHER, SEALING, 5/16" ID X 3/4" OD, EPDM
BONDED SS
1
5
NUT, HEX, 5/16-18, UNC-2, 18-8 SS
2
6
WASHER, FLAT, 19/64" ID x 7/8" OD x 1/8"
EPDM
1
7
WASHER, FENDER, 5/16" ID X 1" OD, 18-8 SS
1
8
WASHER, SPLIT-LOCK, 5/16" ID, 18-8 SS
1
5
DO NOT SCALE DRAWING
SHEET 1 OF 1
7/19/2012
MPW
SCALE: 1:4
WEIGHT:
REV
A
SIZE
TITLE:
DATE:
DRAWN BY:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
1/16
TWO PLACE DECIMAL
.02
THREE PLACE DECIMAL
.005
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF QUICK MOUNT PV. ANY REPRODUCTION IN PART OR AS
A WHOLE WITHOUT THE WRITTEN PERMISSION OF QUICK MOUNT PV IS PROHIBITED.
5
4
3
2
1
UNLESS OTHERWISE SPECIFIED:
1.20
QMSC: Classic Compostion
Mount

Summary of content (2 pages)