Installation Guide

EZ Standing Seam Roof
Mounting System
15 | P a g e
Torque Values for Pitched Roof System
These values must be adhered to, both for mechanical strength and to insure the
performance of the integral grounding and bonding features. It is required that a torque
wrench be used to measure the bolt torque during final assembly, and it is recommended
that anti-seize compound be applied to the screw threads.
Hardware
Torque lbs.
1/4-20 Bolts and Hex Flange Nut
7.5 ft. lbs.
1/4-20 Ground Lug, Flange Nut with 7/16 Hex Head
7.5 ft. lbs.
1/4-20 Ground Lug, Setscrew with 1/8 Allen drive.
4.2 ft. lbs. (50 in. lbs.)
1/4-20 Mid or End Clamp, Female Standoff with
7/16” Hex Head Collar Nut
7.5 ft. lbs.
3/8-16 Nuts
15 ft. lbs.
M10 Bolts
17 ft. lbs.
M10 Set Screws (for steel panels)
10 ft. lbs.
M10 Set Screws (for aluminum panels)
8 ft. lbs.