Full Product Manual

ManualsBrandsGrape Solar ManualsElectricalDirect Mount Racking System for (12) 60 Cell PV Solar Panels with Corrugated Metal

EZ Pitched Roof System

2 of 30

Please read carefully before installing

Product is tested to and recognized to UL 2703 standards for safety grounding and

bonding equipment and meets UL 1703 fire standards.

SunModo PV Rack Mount System can be used to mount photovoltaic (PV) panels in a

wide variety of locations. All installations shall be in accordance with NEC

requirements in the USA. The self-bonding system is for use with PV modules that

have a maximum series fuse rating of 30A. Mechanical design loads per UL 2703:

Downward Pressure: 33.42 psf (1600.2 Pa), Upward Pressure: 22.28 psf (1066.8 Pa),

Down-Slope: 5 psf (239.4 Pa).

TABLE OF CONTENTS

Installer Responsibility: .................................................................................................................... 3

Safety:.............................................................................................................................................. 4

Specifications: .................................................................................................................................. 4

Lag Pull-Out Capacities: .................................................................................................................. 5

SunModo Self-Boning System ......................................................................................................... 6

EZ Roof Mount System Components ............................................................................................... 7

List of Compliant PV Modules ........................................................................................................ 12

Fault Current Path Diagram ........................................................................................................... 15

Tools Required for Installation ........................................................................................................ 16

Torque Values for Pitched Roof System ......................................................................................... 18

Flashing Placement:....................................................................................................................... 19

Sealant Application: ....................................................................................................................... 19

Installation Instructions: .................................................................................................................. 20

EZ Roof Mount Kit K10068-XXX ......................................................................................... 20

EZ Roof Mounting Standoff Kit K10070-XXX ...................................................................... 21

EZ Roof Mount with C-Bracket Kit K12005-001 .................................................................. 21

EZ Roof Mount Kit K10068-B20.......................................................................................... 22

EZ Metal Roof Mount Kit K20051-XXX ............................................................................... 23

EZ Metal Roof Mounting Standoff Kit K10064-XXX ............................................................ 24

EZ Metal Roof Mount with C-Bracket A22001-001.............................................................. 24

Portrait Panel Configuration: .......................................................................................................... 25

Minimum Panel Height ....................................................................................................... 26

End Clamp Attachment ....................................................................................................... 26

Mid Clamp Attachment ....................................................................................................... 26