Instructions / Assembly

Subject to technical changes Copyright © 2012 HatiCon Solar, LLC ∙ 2821 E. Philadelphia Street, Suite A, Ontario, CA 91761 USA Page | 1
∙ Telephone: [phone] ∙ Fax: [phone] ∙ Email: [e-mail] ∙ Website: www.HatiConSolar.com
Installation Instructions:
Pitched Roof Mounting System
*for framed PV-Modules in portrait mode
System Component List:
Installation Instructions:
Pitched Roof Mounting System
*For framed PV-modules in portrait mode
A
E
D
C
B
These mounting instructions reflect the state of technology and our
experience in how to install our systems on site. Due to the individual
characteristics of each roof, we highly recommend commissioning
a professional assessment before beginning the installation.
Hardware:
WEEB (optional)
For electrical grounding of the system
Mid Clamp
For clamping module to rail
E
Tool Requirements:
Approved flashing system or standoff device for
attachment of the system to the roof.
Other requirements:
Open Ended Wrench
Size: 13mm
Size: 5mm
Metric Allen Wrench
Cordless Screwdriver (Optional)
Angle Bracket
For fastening rail to standoff
A
13/60 Rail
For mounting solar modules
B
13/60 Rail Splice
For connecting rails
C
M8 T-bolt and serrated flange nut
For connecting L-bracket to rail
End Clamp
For clamping module to rail
D