Installation Guide

EZ Standing Seam Roof
Mounting System
16 | P a g e
Portrait Panel Configuration:
With a full range of components the EZ Standing Seam Roof Mounting System can be
configured in an endless variety of designs.
A typical portrait roof layout features two East-West rails mounted to North-South seams
using the EZ Standing Seam Roof Mounting System. Mid Clamps are used between PV
panels, they will produce 1/2” spacing between PV panel frames. End Clamps are used to
secure PV panels at the ends of a row.
The EZ Standing Seam Roof Mounting
System can be mounted in a staggered
fashion so that the loads are shared across
the seams. Consult a structural engineer for
attachment frequency and roof construction.