Installation Guide

EZ Standing Seam Roof
Mounting System
8 | P a g e
1/4” Slot Open Rail Splice Kit with
4X 1/4-20 Bolts and Flange Nuts
with integral grounding. May be
repositioned until torqued to
final value.
K10236-001
HR150 Splice Kit
For single-use only
Rail End Cap available for HR150
rails (optional)
A20250-001 (Clear)
A20250-BK1 (Black)
HR150 Rail End Cover
HR150 Channel Clip: snaps into
the open rail to manage wire
bundles where needed. Available
in clear and black.
A20252-001 (Clear)
A20252-BK1 (Black)
HR150 Wire Cover
List of Compliant PV Modules
The HR150 family of products are shown assembled above. Two HR150 Rails are
spliced together with an HR150 Rail Splice. PV electrical wires are shown routed in the
channels of the HR150 Rails, retained with two HR150 Channel Clips snapped into place.