Specification

High Efficiency Mono-crystalline
Photovoltaic Module
Overview
• High efficiency solar cells (approx. 18%) with quality silicon
material for high module conversion efficiency and long term
output stability and reliability.
• Rigorous quality control to meet the highest international
standards.
• High transmittance, low iron tempered glass with enhanced
stiffness and impact resistance.
• Unique frame design with strong mechanical strength for greater
than 50 lbs/ft
2
wind load and snow load withstanding and easy
installation.
• Advanced encapsulation material with multilayer sheet
lamination to provide long-life and enhanced cell performance.
• Outstanding electrical performance under high temperature and
weak light environments.
Warranty
• 10 year limited product warranty on materials and workmanship.
• 25 year warranty on >80% power output and 10 year warranty on >90% power output.
• Refer to warranty document for detailed warranty information.
Certifications
• ETL UL-1703 ISO 9000:2000
• CE TUV
Characteristic
Details
Cell Size
156mm x 156mm (6.14” x 6.14”)
Module Dimension (L x W x T)
1640mm x 992mm x 40mm (64.6” x 39” x 1.6”)
No. of Cells
6 x 10 = 60
Weight
20 kg (44 lbs)
Cable Length
900mm (43.3”) for positive (+) and negative (-)
Type of Connector
MC-IV
Junction Box
Above IP65 Rated
No. of Holes in Frame
4 draining holes, 8 installation holes,
2 grounding holes, 16 air outlet holes.
Mechanical Specifications
Rev.01• 1113
MODEL: GS-S-265-Fab1
Applications
• Any large or small on-grid /off-grid solar power stations.
• Commercial/industrial building roof-top and ground systems.
• Residential roof-top and ground systems.