Specification Sheet

Print
Cut
Cut with Graphtec 4-point axis alignment correction
Cut in general correction
Distorted graphics in printing
Data
This feature compensates for any direction on the X-axis and Y-axis using
sophisticated fifth-generation algorithms. This leads to more accurate registration and
improves the reliability and quality of Print & Cut.
4-point axis alignment
Improved ARMS 5.0 for high precision cutting
The sensitivity of the registration mark sensor is automatically set by measuring
the reflective level of the mark and the background of the actual media. The mark can be
detected when the colour of the mark has a reasonable contrast against the background.
For example, a white mark can also be detected on a coloured background.
Auto sensitivity adjust
Enhanced functions for high productivity
Auto-paneling
● The media stocker can be added for storing multiple roll media
(
Option, up to three
)
● The media can be loaded from the rear or front by changing the direction of the stand
Page 4
Page 3
Page 2
Page 1
Feed length in each page
Feed length
ARMS
Advanced Registration Mark Sensing System
Perforation Cutting
Intuitive operation
Holder is set for
half cut
Setting position of the
blade holder
Holder is set for
half cut
Setting position of the
blade holder
Half cut
Perforation cut
Settings can be easily set up using the large 3-inch LCD and tactile control panel. It is icon
driven and supports multiple languages.
Perforation cutting is performed by controlling
the cutting force instead of blade up/down
movements, increasing throughput. This is
perfect for cutting separation lines for tearing
out labels, fold lines for POP signs, and
others.
Auto-paneling is a new feature that
automatically splits long-length jobs into
smaller pages that are cut sequentially but
without any gaps. The result is a seamless,
long-length finished job. Media movement is
limited to the smaller page being cut,
improving accuracy and tracking.
Dual configuration
Using by two users
User 1 Media 1 Media 2
Application
software 1
Application
software 2
User 2
Using multiple type of media
Using different application software
Switching
Switching Switching
Save two (2) user settings with eight (8) condition settings for each user. A fast access key
allows quick switching between users. One cutter can be shared by multiple users or for
multiple purposes.
It holds both a pen for plotting and a
blade for perforated cutting. The tool is
automatically switched for cutting and
plotting as needed.
2 tool configuration for
cutting & plotting
(
Option
)
ISM incorporates a new scanning algorithm that expands the range of
compatible media. ISM increases the mark scanning success, and can also detect the
registration mark on textured media, such as brushed aluminum, or glossy laminated
materials that were difficult using the conventional method.
ISM (Intelligent Scan Mode)
Multiple-mark compensation
When the design is printed with the matrix copy function, the action of reading
the marks and contour cutting is repeated for each copy. It significantly improve
productivity for Print & Cut.
Segment area compensation
The 4-point axis alignment is performed for each segmented area. In Normal Mode,
this is performed by reading the mark in the middle of the feeding direction for the entire
graphic and then cutting the entire graphic, provides high-precision alignment for long length
Print & Cut applications. In the new Sequential Mode, contour cutting is performed
sequentially in each segmented area. Media movement is limited to the smaller area being cut,
improving accuracy and tracking for heavier media or media that has been laminated.
Auto mark
detection
The first registration mark is automatically detected
within a wide search area; this eliminates the need
to manually move the sensor near the registration
mark position. Subsequent marks are automatically
located which improves the operation of the
registration mark searching.
FC8600 series
It searches the green area as the first step.
If there is no mark detected, it then searches
the yellow areas.
Current tool
position
Mark searching
area
Negative
direction
Detection area
FEED
ARMS
5.0
ARMS
4.0
Cutting
area
The new ARMS 5.0 expands the
cutting area to include the area outside the
registration marks. This increases the
production efficiency by reducing media
waste.
Expanded effective cutting area
Printed media Nomal Mode Sequential Mode
*
This function is available when the Graphtec Studio, Cutting Master 3 or Cutting Master 2 software is used.
Axis alignment is performed
for each segmented area and
contour cutting is performed
on the entire graphic.
Axis alignment is performed
for each segmented area and
contour cutting is performed
sequentially on each area.
Additional marks
* Normal mode is available when Graphtec Studio, Cutting Master 2/3, or Plotter Controller software
is used. Sequential mode is available when Graphtec Studio (ver. 2.1.200 or later) or Cutting Master
3 (ver. 2.1.211 or later) is used. This function is available in firmware version 2.10 or later. Media
must be within the specification in range. Marks may not be detected due to poor printing quality or
media surface.
* Media must be within the specification range. Marks may not be detected due to poor printing quality or media surface.
This function is available in firmware version 2.10 or later.
＜
Main Features
＞
Graphtec Pro Studio Plus is the enhanced edition of
Graphtec Pro Studio. It is optional software with
functions for improving productivity and advanced
design. Additional functions include: transformation of
characters and graphics, automatic sequence number
insertion, barcode creation, templates for rhinestone
creation, nesting, directional change of cutting lines,
changing cutting order, and more.
Graphtec Pro Studio Plus
Option | Advanced software
Windowｓ 10/8.1/8/7
Supported OS
*
1
●
Deformation, shadow, and stripe of texts and shapes
●
Check the spelling
●
Vectoring
●
Filter for bitmap image
●
Serialized number, Bar-code, QR code, etc.
●
Power Nest (Nesting)
●
Cutting simulation (Changing cutting order)
●
Output by a layer or colour
●
Inserting a line for weeding