User's Manual

11Manual Receiver GR-12+ 3xG Graupner HoTT 2. 4
move the left wing down through at least 45°.
• This process denes the one axis and direction; now you must repeat the procedure for the other
two axes.
• The gyro axis 1, 2 or 3 is now displayed in the ‘Aileron / Elevator / Rudder’ display; a negative
prex will appear if servo reverse is activated.
• Once all three axes are dened, the display automatically reverts to ‘New setting: no’.
WARNING: once you have completed this procedure, it is absolutely essential to check that all
the gyros are working in the correct direction. This is accomplished by moving the model around
all three axes in turn, and checking the control surface deections - see diagrams below. You
must not y the model before doing this: crash hazard!
ELEVATOR
Model movement Control surface response (seen from the tail)
RUDDER
Model movement Control surface response (seen from the tail)
AILERON
Model movement Control surface response (seen from the tail)