User's Manual

28 Manual Receiver GR-24PRO 3xG+3A+3M+Vario Graupner HoTT 2. 4
move the left wing down through at least 45°.
• This process denes the one axis and direction; now you must repeat the procedure for the other
two axes.
• The gyro axis 1, 2 or 3 is now displayed in the ‘Aileron / Elevator / Rudder’ display; a negative
prex will appear if servo reverse is activated.
Once all three axes are dened, the display automatically reverts to ‘New setting: no’.
WARNING: once you have completed this procedure, it is absolutely essential to check that
all the gyros are working in the correct direction. This is accomplished by moving the model
around all three axes in turn, and checking the control surface deections - see diagrams
below. You must not y the model before doing this: crash hazard!
ELEVATOR
Model movement Control surface response (seen from the tail)
RUDDER
Model movement Control surface response (seen from the tail)
AILERON
Model movement Control surface response (seen from the tail)