User's Manual

8 / 20
34001_HB_V1
So that the copter can be clearly assigned in the event of a
crash.
Due to safety and licensing reasons (CE), any unauthorized
reconstruction and/or modification of the product is prohibited.
Only use the components and spare parts that we recommend.
Always use matching, original Graupner plug-in connections of
the same design and material.
Make sure that all of the plug-in connections are tight. When dis-
connecting the plug-in connections, do not pull the cables.
Protect the Vector unit from dust, dirt, moisture and other foreign
parts. It must be protected from vibration as well as excessive
heat or cold. The models may only be operated remotely in nor-
mal outside temperatures such as from -10°C to +55°C.
Only operate all your HoTT components using the current soft-
ware version.
If you have questions which cannot be answered by the operat-
ing manual, please contact us (contact information see page 3)
or another expert in the field.
WARNING
Safety notes during the use
Also while programming, make sure that a connected electric
motor cannot accidentally start. Injury risk by the turning propel-
lers! Always remove the propellers when programming. Pro-
gram always the motors stop switch on the transmitter. (See
transmitter manual)
Avoid shock and pressure. Check the Vector unit regularly for
damages to the housings and cables, specially after a crash of
the model. Damaged or wet electronic components, even if
re-dried, should no longer be used!
Never touch the turning propellers, this can cause injury
The propellers must be mounted securely, thrown parts can
cause serious injury.
Observe the safety notes of the required components.
Never fly against people or animals, risk of injury through the
propellers
!