User's Manual

P4
Normal Mode
(1) Basic Operation
- When Power on, t
he last used memory will be bound
Receiver.
-
In case of No Receiver connection, if you press the
button of left stick for 1sec,
it will search Receiver.
- if Receiver
is not searched, it will be repeated until
Receiver, and you can bind with new Receiver by
pressing BIND/LED Switch.
(2) BIND mode
In case of no having receiver, which is already saved in
memory, then you can bind with new receiver by
pressing BIND Switch.
If Receive Signal is normal, RED LED will be turned On.
In case of Waiting Receiver or Range warning, RED
LED will be slow blinked.
(3) Range Test mode
Functional switch:
Press shortly button of
SNAP once.
After Binding with R
eceiver, if you shortly press this
functional Switch, Range Test mode will operate for
90sec.
While operating Range mode, if you shortly press this
switch, Range test mode will be ended.
A
t Range mode operation, RED LED will blink quickly
and make buzzer sound.
After 90sec, Beep sound will be
occurred
enter to Main Mode.
(4) Low Battery Voltage warning
RED LED will do fast blinking. (
RED LED indicate State)
At under 3200V,
Warning will be announced and at
3300V, warning will be removed.
3Cell Alkaline Battery will be used.
Important Point :
While Binding, Transmitter should always have distance
from the Receiver. At least 1m should have.
Otherwise, it might be connected to
Return channel, and
do malfunction.
he last used memory will be bound
to
In case of No Receiver connection, if you press the
it will search Receiver.
is not searched, it will be repeated until
find
Receiver, and you can bind with new Receiver by
In case of no having receiver, which is already saved in
memory, then you can bind with new receiver by
If Receive Signal is normal, RED LED will be turned On.
In case of Waiting Receiver or Range warning, RED
Press shortly button of
SPEED +
eceiver, if you shortly press this
functional Switch, Range Test mode will operate for
While operating Range mode, if you shortly press this
t Range mode operation, RED LED will blink quickly
occurred
one time, and
RED LED indicate State)
Warning will be announced and at
While Binding, Transmitter should always have distance
from the Receiver. At least 1m should have.
Return channel, and
Program Mode
(
workable only at Binding condition
(1)
Condition of Basic Operation
Enter to Program mode
simultaneously for 2sec.
Release Program mode : Press two Stick Switch
simultaneously
for a second.
Indication of
Program mode : Red Led
once per a second interval
.
Program mode : Blink
once per a second interval
(2) Saving Data
50pcs of last used
Data could be saved.
(3) Adjustment of
Servo End
In case of
Stick Calibration, Default will
value, Customer can adjust trim as below
- 100% --
> 1100us ~ 1900us
At Max. or Min. Positi
on of Stick,
Range of Trim is available
0% ~ 100% ~ 150%
I
f move to 100% position, High Beep
occurred once.
-
Red Led will be blinked once per a second interval
Program mode : Blink
once per a second interval
(4) Servo Reverse Set
This is used
when change Servo direction.
A
ll sticks are on neutral pos
switch to Max. or Min. Posi
tion.
I
f press Power switch with pressed trim switch to Max. or
Min. position, Normal mode and Reverse mode will be
changed.
- Indication of Servo Rece
i
blinked once per a second interval
- Normal mode :
Green LED will be blinked once per a
second interval.
workable only at Binding condition
)
Condition of Basic Operation
: Press two Stick Switch
Release Program mode : Press two Stick Switch
for a second.
Program mode : Red Led
will be blinked
once per a second interval
Data could be saved.
Servo End
Position
Stick Calibration, Default will
be 100%. At this
value, Customer can adjust trim as below
way.
> 1100us ~ 1900us
on of Stick,
adjust Trim Switch
0% ~ 100% ~ 150%
.
f move to 100% position, High Beep
sound will be
Red Led will be blinked once per a second interval
once per a second interval
when change Servo direction.
ll sticks are on neutral pos
ition, and move the trim
tion.
f press Power switch with pressed trim switch to Max. or
Min. position, Normal mode and Reverse mode will be
i
ver mode : Red Led will be
blinked once per a second interval
Green LED will be blinked once per a