User's Manual

31 / 36
S1035_Falcon_12_jh_V1
Tail dynamic
10 -100, default setting: 65
Higher dynamic values provide a more direct control feeling, lower
values result in a smoother control feel. If the values are too high,
the tail does not stop and it can overflow. If the values are too low,
the control behavior becomes softer.
Vibration damping
YES-NO, default setting: NO
The vibration damping automatically detects emerging vibrations at
the tail rotor, e.g. at extreme speed flights (wind flag effect) or strong
speed changes in some 3D maneuvers (over-speed) and prevents an
extremely strong swing-up. The tail rotor should be set free of vibra-
tions without active vibration damping in 3D and normal flight situ-
ations, only with a solid basic setting it makes sense to activate the
vibration damping.
Stop damping R / Stop damping L
0 -20, default setting: 5
The rear stop parameter on the right and left optimizes the stop
behavior after a yaw movement. The tail should stop as quickly as
possible without moving back. Select the value so low that the tail
does not move back at when stopping. The higher the value, the
more the stop is dampened. Determine the value in steps of 1.