User manual

12
Remote control set description
simple to program
• Swashplate limiting: This function limits the
swashplate’s tilt angle to prevent the potential for
mechanical collision in helicopter 3D operation at
full-limit roll and pitch-axis
• Multi-channel function for operating Graupner
product line NAUTIC modules
• Digital trimming, effective per specific flight-phase
• C1 changeover, brake/elec. motor: This changeo-
ver can be implemented very easily via enhanced
flight phase programming. The pilot determines
the joystick positions (forward/rear) at which the
motor is to switched off or the airbrakes are to be
retracted.
• Twelf freely programmable mixers for fixed-wing
or helicopter models, each with freely selectable
input and output functions; four curve mixers with
innovative 6-point curve technology for easy to
set and adjust curve values at up to eight points
for throttle, pitch, tail or other nonlinear character-
istics. The arithmetic unit in the CPU employs an
ingenious method of calculating polynomial ap-
proximations for truly-rounded, ideal MPC (multi-
point curve) mixer curves.
• Curve mixer points can be offset in both axes us-
ing the four-way buttons.
• Up to seven flight-phase programs can be indivi-
dually adapted for each model and given a name.
The switchover time is programmable separately.
• SUPER SERVO menu with a perfect overview of
all servo setting data and simple parameter cor-
rection at four “levels”: direction of rotation, mid-
point setting, separate servo travel on both sides
and separate travel limiting on both sides for 8
(
mc-16 HoTT) respectively 12 servos (mc-20
HoTT) with a total of 48 respectively 72 setting
options.
• SUPER-DUAL-RATE, EXPO and EXPO/DUAL-
RATE menu with 36 potential setting variants
for three servo functions and up to seven flight
phases
• Servo display hot-key: from virtually any menu,
pressing the  and  buttons of the left-hand
four-way button takes you directly to the servo
display
• Highly practical multi-function menus for fixed-wing
model aircraft and helicopters. Entering the num-
ber of aileron and flap servos, or collective pitch
servos, automatically sets up all the relevant mixer
functions in the appropriate multi-function menu.
• Helicopter swashplate mixer for 1, 2, 3, or 4 point
steering.
• Future-proof design: updatable, high-speed 32-
bit operating system with modern flash memory,
simple update capability via the USB port and the
micro-SD card.
• Transmitters feature sockets for PC USB interface,
earphone, SMART-BOX, DSC system as standard;
they are prepared for Trainer mode operations
• ESC button switches the screen from the Main
menu to the »Telemetry« menu and back.
• Comprehensive telemetry displays, programming
and analysis functions directly on the transmitter
screen
• Wired and wireless Trainer systems with total
transfer; all settings are entered at the Teacher
transmitter.
mc-16 HoTT
• 20 model memories with storage of all model-spe-
cific programming and set-up parameters
• Eight control functions as standard, can be ex-
panded to twelve at extra cost
• MULTI-DATA GRAPHIC LCD monitor with blue
backlighting for greatly improved legibility in dif-
ficult lighting conditions.
• Function encoder with two four-way push-buttons
mc-16 and mc-20 series computer systems
two remote control sets with 2,4-GHz-Graupner|SJ-HoTT technology
(Hopping Telemetry Transmission)
for simplified programming and accurate settings
• Key-Lock function guards against accidental op-
eration
• Transmitter features two 3-position switches (SW
5/6 + SW 11/12), two side-mounted proportional
controls (Lv1 + 2) and two proportional sliders
(Sl1 + 2) as standard; controls can be assigned to
any function
• Certain menu points can be unlocked as an extra-
cost option; see Contents on pages 2 and 3 and
the start of the relevant menu points
*  Standard option
 Option can be unlocked at extra cost
mc-20 HoTT
• 24 model memories with storage of all model-spe-
cific programming and set-up parameters
• Maximum twelve control functions
• Two MULTI-DATA GRAPHIC LCD monitors with
blue backlighting for improved legibility in difficult
lighting conditions
• A function encoder with two touch-sensitive, four-
way keys („CAP Touch“) permit simplified pro-
gramming and precise settings
• Twelve toggle switches (three 3-position switches
(SW 2/3, 5/6 + 11/12), five 2-position switches
(SW 4, 7, 9, 13 + 15), two centre-biased 2-posi-
tion switches (SW 8 + 14), two 2-position locking
switches (SW 1 + 10), two momentary switches
on the rear of the transmitter (SW 16 + 17 / 18 +
19), two INC/DEC buttons (CTL 5 + 6), two side-
mounted proportional controls (Lv1 + 2) and two
proportional sliders (Sl1 + 2) installed as standard;
controls can be assigned to any function
• Key-Lock function guards against accidental ope-
ration
• Voice and, as applicable also MP3 file, output over
headset output or loudspeaker