User manual

15Remote control set description
mc-16 HoTT and mc-20 HoTT transmitter
Frequency band 2.4 … 2.4835 GHz
Modulation FHSS
Region EURO or FRANCE,
see page 272
Control functions
mc-16 HoTT:
8 functions, 4 of these can be
trimmed, can be expanded to
12 functions at extra cost
mc-20 HoTT:
12 functions, 4 of these can
be trimmed
Temperature range -10 … +55 °C
Antenna Integral patch aerial inside
case
Operating voltage 3.2 … 4.8 V
Current draw about 400 mA
Range up to about 4 000 m
Dimensions about 235 x 228 x 66 mm
(without hand rests)
Weight about 1200 g with transmitter
battery, without accessorys
GR-16 HoTT receiver
order no. 33508
Operating voltage 3.6 … 8.4 V*
Current draw about 70 mA
Frequency band 2.4 … 2.4835 GHz
Modulation FHSS
Antenna 2 diversity antennas, about
145 mm long, about 115 mm
of this length encapsulated
and about 30 mm active
Plug-in servos 8
Sensor sockets 1
Temperature range -10 … +55 °C
Dimensions about 46 x 21 x 14 mm
Weight about 12 g
GR-24 HoTT receiver
order no. 33512
Operating voltage 3.6 … 8.4 V*
Current draw about 70 mA
Frequency band 2.4 … 2.4835 GHz
Modulation FHSS
Antenna 2 diversity antennas, about
145 mm long, about 115 mm
of this length encapsulated
and about 30 mm active
Plug-in servos 12
Sensor sockets 1
Temperature range -10 … +55 °C
Dimensions about 46 x 31 x 14 mm
Weight about 16 g
Technical data
* The specification for permissible operating voltage range applies
only to the receiver. Please note in this context that receiver input
voltage is applied without regulation to connected servos but
the voltage range for most connectible servos (speed controls,
gyros, etc.) is only 4.8 to 6 V