User manual

154
Program description - Phase settings | Winged models
Example:
Pha1
Pha2
Pha3
Name
Pha4
Pha5

+
+
–
–
3.0s
2.0s
0.1s
0.1s
Sw.time
Nor mal
Launch
Dist.
4.0s
The switchover time from any other phase to Phase 1
«normal» will take 4,0 s.
The time for a switchover from, for example, Phase 1
to Phase 3, is set to 2,0 s and the time for a switcho-
ver from Phase 1 or 3 to Phase 2 “Launch” is 3,0 s.
Such asymmetric transition times can be useful when,
e. g. switching between extremely different flight phas-
es, such as between aerobatics and normal flight.
A simultaneous tap on the  or  keys of the
right four-way button (CLEAR) will reset the time in
the currently active value field back to 0,1 s.
Note:
The “switch time” set here applies uniformly to all
settings that are specific to flight phases, and thus to
all mixers activated in the »Wing mixers« menu, see
page 170. Accordingly, the transition between flight
phase-specific mixers does not occur abruptly. How-
ever, if individual servos are to be switched without
a delay then these can be defined accordingly in the
»Non-delayed chan« menu, see page 161.