User manual

161Program description - Non-delayed channel
Non-delayed channel
Channel-dependent delays to switching
This option is available as standard on the
mc-20 HoTT transmitter only.
Use the selection keys of the left or right
four-way button to scroll to the »Non-
delayed channel« menu option in the Multi-function
menu:
Phase settings
Phase trim
Logical switch
Timers (general)
Phase assignment
Non-delayed chan
Phase settings
Logical switch
Timers (general)
Fl. phase timers
Phase assignment
Non-delayed chan
Open this menu option with a tap on the center SET
key of the right four-way button.
Non-delayed channels
non-delay
normal
normal
1 2 3
4
5
6
On the »Phase settings« menu, you will have set the
necessary switch times for flight phase transitions.
In this menu, which is available as standard on the
mc-20 HoTT transmitter only, you can now disable
the transition delay set previously, per flight phase
and for individual control channels – e. g. for the motor
channel for electric models or heading-lock systems
for helicopter gyros, etc.
Switch over to the corresponding flight phase. This is
shown at the bottom left of the display.
Use the selection keys of the left or right four-way but-
ton to move the “” onto the corresponding channel
then briefly tap the center SET key of the right four-
way button.
The switch icon changes from “normal” to “non-delay”
and vice versa:
Non-delayed channels
non-delay
normal
normal
7 8 9
10
11
12
Note:
If you have an eight-channel mc-16 HoTT transmit-
ter with the »Non-delayed channels« menu point
unlocked, this display will only show control channels
1 … 8, reflecting the reduced number of channels.
mc
 
16 20