User manual

215Program description - Mix active / phase
MIX active / phase
Selecting free mixers for flight phases
This option is available as standard on the
mc-20 HoTT transmitter only.
Use the selection keys of the left or right
four-way button to scroll to the »MIX ac-
tive / phase« menu option in the Multi-function menu:
Fl. phase timers
Wing mixers
MIX-only channel
Dual mixer
Free mixers
MIX active/phase
Helicopter mixer
Fl. phase timers
MIX-only channel
Dual mixer
Free mixers
MIX active/phase
Open this menu option with a tap on the center SET
key of the right four-way button:
LinearM1
LinearM2
LinearM3
6
EL
C1
EL
LinearM4
3
8
S
EL
yes
SEL
yes
yes
yes
Mix act. in phase
The “free mixers” on the previous menu can be ena-
bled and disabled for specific flight phases. You there-
fore have complete freedom in assigning specific
mixers only to specific flight phases.
Switch to your chosen flight phase and use the selec-
tion keys to page through this menu. The mixers on
the »Free mixers« menu are displayed in the center
column.
Following the activation of the value field by briefly
tapping the center SET key of the right four-way
button, if the respective mixer is set to “no” by using
the selection keys on the left or right four-way but-
ton, then this mixer is deactivated in the flight phase
shown at the bottom of the display and, simultane-
ously, removed from the »Free mixers« menu list:
LinearM1
LinearM2
LinearM3
6
LinearM4
3
8
S
SEL
Speed
no
EL
C1
EL
EL
yes
yes
yes
Mix act. in phase
If a mixer is “lost” in the »Free mixers« menu …
ty
fr
to
M1
M3
6
EL
M4
M5
3
8
S
EL
??
??
4
2
M6
??
??
… then you should either switch through the flight
phases until it appears again … or, alternatively,
switch to this menu and temporarily reactivate the
mixer you are looking for:
ty
fr
to
M1
M2
M3
6
EL
C1
EL
M4
M5
3
8
S
EL
??
??
Tr
C4
4
2
mc
 
16 20