User manual

273Program description - Basic settings
MUST be changed to “France” for the transmitter
whenever it is operated in France. In no case may
the Universal/EURO mode be used in France!
A simultaneous tap on the  or  selection keys
of the right four-way button (CLEAR) will reset the
field shown in inverse video back to “Euro”.
Note:
In July 2012 a new list of “Class 1 Devices” was pub-
lished by the appropriate EU Commission, and at the
same time the approved upper limit of the frequency
band pertaining to 2.4 GHz radio control systems
(“sub-class 22”) was extended from 2.400 to 2.485
GHz, thereby eliminating the legal requirement for the
earlier “France mode”. See also http://ec.europa.eu/
enterprise/sectors/rtte/files/rtte_subclass_july2012_
en.pdf.
BT headset and following lines
Notes:
• This menu point, and the menu points which follow
it, are only relevant if you have installed the option-
al Bluetooth module, Order No. 33002.5, in your
transmitter, and have initialised it as described on
page 37.
• A detailed description of the Bluetooth module, Or-
der No. 33002.5, and the method of operating the
following menu points, can be found in the instruc-
tions supplied with every BT module, and also on
the Internet at www.graupner.de. For this reason
the following section only includes a brief descrip-
tion of the individual options:
The option …
Basic settings
SEL
Power on warn.
unlim
Touch Sense
2
Region
Euro
BT Headset
OFF
… is used to detect and couple Bluetooth devices.
The same line can be used to select one of the two
available transmission processes. It is also possible
to remove all coupled BT devices again by simultane-
ously pressing the select buttons  or  of the
right-hand four-way button (CLEAR) when the Value
field is active.
The number of Bluetooth devices detected during a
coupling procedure is displayed at far right in the next
line down.
You can select the BT device (1 … max. 9) you wish
to use in the Value window to the left of this; its name
is then displayed on the left of the same line; for
example:
Basic settings
SEL
Touch Sense
2
Region
Euro
BT Headset
1/3BTH002
A2DP
In the line …
Basic settings
SEL
Region
Euro
BT Headset
A2DP
1/3BTH002
ID PAIR
ONOK
… you can start and stop the connection to the se-
lected BT device, and in the line …
Basic settings
SEL
BT Headset
1/3BTH002
ID PAIR
BT Volume 8
A2DP
ONOK
… you can adjust the volume of your BT device using
the same procedure described earlier for adjusting
volume for the “Speech volume”, “Vario volume” and
“Button volume” options.