User manual

276
Program description - Code lock
Code lock
Locking the multifunction menu
This option is available as standard on the
mc-20 transmitter only.
Use the selection keys on the left or right
four-way button to scroll to the menu op-
tion »Code lock« menu option in the multi-function
menu:
MP3 player
Basic settings
Servo display
Servo test
Info display
Code lock
Tap briefly on the center SET key of the right four-way
button to open this menu option:
Code lock
Desired (new)
secret number
(_ )
SET
21 3 4
Access to the multifunction menu can be locked
against unauthorized use by a four-digit secret code
comprised of the numbers 1 to 4. This code lock is
entered by way of the selection keys of the left four-
way button according to the scheme shown in the
display, for example:
Code lock
Desired (new)
secret number
(123_)
SET
21 3 4
As soon as another tap of a left four-way button se-
lection key occurs after the fourth number has been
entered, the message shown below will appear in the
display:
Code lock
De i
r
)
CLR
21 3
Memorise secret
number carefully
A brief tap on the center ESC key of the left four-way
button will confirm the entered secret code and exit
the menu.
On the contrary, a brief tap on the center SET key
of the right four-way button will confirm the currently
active CLR field at the bottom right of the display and
thus erase the entered digits.
Make note of the secret code and keep it safe.
Otherwise, the transmitter must be sent in to
Graupner service for decoding.
The lock becomes active the next time the transmitter
is switched on. However, the control remains ready
for operation. However, a call-up of the multi-function
menu, and thus also a model change, can no longer
be accomplished without entering the correct number
combination:
Code lock
Desired (new)
secret number
(_ )
SET
21 3 4
A renewed attempt following an incorrect entry is only
possible after the lapse of a time-out:
Code lock
De i
r
)
CLR
21 3
Input error
Time lock
Deletion of the secret code
If the secret code is to be erased later on, tap twice
on the center SET key of the right four-way button
right after calling up this menu option.
Code lock
Desired (new)
secret number
(1234)
CLR
21 3 4
The first activation of the center SET key of the right
four-way button will erase the secret code (CLR):
Code lock
Desired (new)
secret number
(_ )
SET
21 3 4
And the second activation will confirm the empty
entry field (SET). The message shown will appear in
the display:
Code lock
D i
r
)
SET
21 3
Memorise secret


none
Now exit the menu with a brief tap on the ESC key of
the left four-way button.
Leaving the menu without input of a secret code
To leave the menu opened out of curiosity or by acci-
dent when no other key has been touched. Therefore,
the display appears as follows:
mc
 
16 20