User manual

309Programming examples - Control of temporal processes
The function you programmed functions as desired
according to these suggestions – which you can verify
at any time after switching to the »Servo display«
by simultaneously pressing the keys  of the left
four-way button – then to, complete the programming,
an arbitrary switch, such as “SW 15” is assigned in
the menu …
»Control adjust« (page 118 or 122)
… to the control channel used instead of the selected
side-mounted proportional control – in these examples
“Lv1” to channel “9” – and the desired symmetric or
asymmetric time span is set in the “– Time +” column
for the amount of time in which the function should
ultimately take place:
In6
offset
0%
0%
0%
–––
0%
In7
In8
In9
–––
–––
GL
GL
GL
GL
typ
fr
fr
fr
–––
15
In6
– time +
0.0s
0.0s
0.0s
9.9s
In7
In8
In9
0.0s
0.0s
0.0s
9.9s
Notice:
In the course of the switch assignment, always bear
in mind that you can also trigger multiple functions
with one switch! For example, with the same switch
a landing gear connected to Output 6 can be started
and, as shown here as an example, the time-con-
trolled landing gear flaps connected to Output 9 and/
or the headlight, etc.