User manual

32
Transmitter description - Function fields | Position indicator | Entry lockout
Note:
This option is only available as standard on the mc-
20 HoTT transmitter, but can be unlocked on the
mc-16 HoTT transmitter at extra cost.
A lockout for the touch keys, and thus protection
against inadvertent use of all setting options, can be
established by touching and holding the ESC and
SET keys simultaneously for about two seconds while
the transmitter is in its basic display. This lockout
condition is indicated by a key symbol, located at the
intersection point of the trim bars, which is displayed
in reverse video.
#01
2:22h
Stp
Flt
0:00
0:00
5.5V
3.9V
M
HoTT
The lockout is effective immediately but controls re-
mains operationally ready.
This lockout can be removed by again touching and
holding the ESC and SET keys for about two sec-
onds.
Entry lockout
Depending on the given menu, certain function fields
will appear on the bottom display line:
CLR SEL STO SYM ASY
A marked function is activated with a tap on the
SET key.
Function fields
CLR (clear) erase
SEL (select) selection
SET (set) “set” or adjust a value
STO (store) store (e. g. control position)
SYM set values symmetrically
ASY set values asymmetrically
POS Only in »Trim memory« menu
switch field symbol (assignment of
all types of switches)
within a menu, change to the sec-
ond page, (menu continuation)
Function fields in the display
CLR, SEL, STO, SET, SYM, ASY, POS, ,
When you operate one of the two INC/DEC buttons
CTL 5 + 6, which are fitted to the two switch boards of
the mc-20 HoTT transmitter only, a small symbol
appears on the left of the screen adjacent to the two
vertical position indicators:
At the same time, for the duration of the control‘s op-
eration, the position indicator for the two vertical bars
in the middle will change from displaying current trim
position to a display of the respective current position
of the controls CTL 5 & 6.
Logically, the left control (CTL 6) is displayed by the
left bar indicator and the right bar indicator displays
the position of the right control (CTL 5). The two hori-
zontal bars continue to show current trim positions of
respective stick trim controls:
#01
2:22h
Stp
Flt
0:00
0:00
3.9V
M
HoTT
About 2 seconds after operating one of the controls
has ended, the display will again revert to display of
current trim positions of the four trim controls gener-
ated by the two sticks.
Note:
On the
mc-16 HoTT transmitter these two INC/DEC
buttons can be retro-fitted by your local Graupner
Service Centre at extra cost.
Position indicator
INC/DEC buttons CTL 5 and 6