User manual

44
Transmitter description - Telemetry data display
GPS
N
W
O
S
km/h
DIS
m
m/s
ALT
m
0
0
0.0
0
If attached to the receiver, this display will depict the
data from a GPS module with integrated Vario, Order
No. 33600.
The displayed items are as follows:
Value Explanation
W / N / E / S west / north / east / south
km/h speed
DIS horizontal distance in m
m/s ascent/decent rate in m/s
ALT altitude relative to starting location in m
Vario
0.0
0
m
m
s
If attached, this display will depict the altitude (in m)
relative to location, starting location as well as the
current rate of ascent/descent (in m/s) from data
originating from the Vario integrated into the GPS-/
Vario module (order no. 33600).
Speed display
0
km/h
If the corresponding sensor is available, this screen
displays the model’s actual speed over the ground.
AIR ESC
RECEIVER
GENERAL
ELECT. AIR
VARIO
GPS
AIR ESC
0
0
0rpm
0.0A
0.0A
0
0mAh
0( 0)°C
0.0V/ 0.0V
This screen displays the data generated by a brush-
less speed controller with internal telemetry, Order
No. 33718 to 33770 and 33850 (correct at time these
instructions were revised), which is connected to the
receiver.
Key, reading from top left to bottom right:
Value Explanation
V Left-hand value: actual battery voltage
Right-hand value: actual battery voltage
in present power-on period
°C Left-hand value: actual speed controller
temperature
Value in brackets: maximum controller
temperature in present power-on period
mAh Battery capacity consumed
A Centre and bar display: actual current
Right-hand value: maximum current in
present power-on period
rpm Centre and bar display: actual rotational
speed of the motor connected to the
speed controller.
Right-hand value: maximum rotational
speed in present power-on period
RPM display
rpm
0
0
0
This screen displays the current rotational speed of
the motor connected to the brushless speed control-
ler.