User manual

73Winged models - Receiver layout
Installation notices
Servos MUST be connected to the receiver in the
sequence illustrated here.
Outputs which are not used are simply left empty.
Also be sure to follow the notices on the next
pages.
Winged aircraft with and without motor having up
to 4 aileron servos and up to 4 flap servos …
… and tail plane type “normal” or “2 elevator
servos”
Receiver power supply
Free or left aileron 2 or aux. function
Free or right aileron 2 or aux. function
Rudder
Aileron or left aileron
Elevator or 1st elevator
Free or 2nd elevator or aux. function
Receiver power supply
Airbrake or throttle servo
or speed controller (electric motor)
Right aileron or aux. function
Flap or left flap
Right flap or free or aux. function
Free or left flap 2 or aux. function
Free or right flap 2 or aux. function
… and tail plane type “V tail unit”
Receiver power supply
Free or aux. function
Free or aux. function
Aileron or left aileron
Free or aux. function
Receiver power supply
Airbrake or throttle servo
or speed controller (electric motor)
Right aileron or aux. function
Flap or left flap
Right flap or free or aux. function
Free or left flap 2 or aux. function
Free or right flap 2 or aux. function
Left rudder / elevator
Right rudder / elevator
Delta/flying wing aircraft models with and without
motor having up to 4 aileron/elevator servos and
up to 4 flap/elevator servos
Receiver power supply
Free or aux. function
Free or aux. function
Left elevon
Right elevon
Free or aux. function
Receiver power supply
Airbrake or throttle servo
or speed controller (electric motor)
Free or aux. function
Free or left flap / elevator
Free or right flap / elevator
Free or aux. function or left flap 2 / elevator
Free or aux. function or right flap 2 / elevator
Free or rudder
Because of orientation differences for installed ser-
vos and their rudder linkages, the actuating direction
of some servos may be initially backward. The table
below provides remedies.
Model
type
Servo
direction
wrong
Remedy
V tail Rudder and
elevator reversed
Reverse polarity of ser-
vos 3 & 4 in the »Servo
adjustment« menu
Rudder correct,
elevators reversed
Swap servos 3 & 4 on
the receiver
Elevators correct,
rudder reversed
Reverse polarity of ser-
vos 3 & 4 in the »Servo
adjustment« menu
AND swap them on the
receiver
Delta,
flying
wing
Elevator and aileron
reversed
Reverse the polarity
of servos 2 & 3 in the
»Servo adjustment«
menu
Elevator correct,
aileron reversed
Reverse polarity of ser-
vos 2 & 3 in the »Servo
adjustment« menu
AND swap them on the
receiver
Aileron correct,
elevators reversed
Swap servos 2 & 3 on
the receiver
All “program descriptions” for menus relevant to a
winged aircraft model are marked with a winged
aircraft symbol …
… so only these menus need to be dealt with to pro-
gram a winged aircraft model.