User manual

80
Program description - Copy / Erase
Copy model  model
Select the “Copy model  model” sub-menu with the
 selection keys of the left or right four-way button
then tap the SET key:
Copy ligh phase
Erase model
C l l
=>
SWITCHING RF OFF
OK
If the message shown above should appear, the
transmitter’s RF module is still active.
You can interrupt the process by pressing the central
ESC button of the left-hand four-way button.
Pressing the SET button of the right-hand four-way
button resumes the process. However, if the receiving
system is switched on, you should switch it off before
doing this.
Choose the model to be copied with the  selec-
tion keys of the left or right four-way button …
01
03
04
ULTIMATE
02
GRAUBELE
STARLET
BELL47G
Copy from model:
R12
R12
–––
R12
… then, following the change into the “Copy to model”
window caused by another tap on the SET key of the
right four-way button, the destination memory can be
selected with the  selection keys of the left or right
four-way button. Yet another tap on the SET key will
then confirm the copy process or a tap on ESC key
will cause the copy to be cancelled. A memory loca-
tion which is already occupied can be overwritten.
01
03
04
ULTIMATE
02
GRAUBELE
STARLET
BELL47G
model to be erased :
R12
R12
R12
–––
… whereby another tap on the SET key will cause the
confirmation request …
Model really
GRAUBELE
to be erased?
NO
YES
01
… to appear. A NO response will cause the process
to be canceled and a return to the previous screen.
Selecting the YES response with the  selection key
of the left or right four-way button followed by confir-
mation of the selection with a brief tap on the SET
key will erase the selected model memory.
Caution:
This erase process cannot be undone. All data in
the selected model memory will be erased com-
pletely.
Note:
If the currently active model memory is to be erased,
a model type “Winged” or “Heli” must be defined im-
mediately after the erase process. If, however, an in-
active memory location is erased, it will subsequently
appear in “Model select” list as “free”.
Copy / Erase
Erase model, copy model  model, copy from or to SD card, copy flight phases
This option is available as standard on
both transmitter types.
Use the  selection keys on the left or
right four-way button to select the »Copy /
Erase« option in the multi-function menu:
Suppress menus
Suppress models
Model select
Base setup model
Model type
Copy / Erase
Suppress menus
Suppress models
Model select
Base setup model
Helicopter type
Copy / Erase
Open this menu option with a tap on the center SET
key of the four-way button pad:
Erase model
Copy flight phase
Erase model
Copy model–>model
=>
=>
=>
Export to SD
Import from SD
=>
=>
=>
=>
Select the “Erase model” sub-menu with the 
selection keys of the left or right four-way button then
briefly tap on the SET key.
Choose the model to be erased with the  selec-
tion keys of the left or right four-way button …
mc
 
16 20