User Manual

4. User Guide
1) How to connect BL-WM (Connecting the BL-WM)
a) Download BL-WM Link app then install ( please refer to our homepage )
b) Like figure below, the signal of connection location for BL-WM and ESC setting
should be connected with 3 pins white band of WiFi.
Note: If Graupner transmitter would be used, clear SUMD V2 at CH2 setting then
use.
<Connection between BL-WM and ESC>
c) Connect the ESC to Power then switches on the ESC. Once WiFi works, the Yellow LED
on the BL-WM should flash. Then, refer to “BL-WM – Setup item”
Note: To minimize the impact of WiFi to a receiver, WiFi module should be placed far from an
antenna on a receiver.
2) BL-WM setting (BL-WM – Setup)
< BL-WM Link application and , connected WiFi ID>
Note : GRUAPNER_ESC_XXXX is individual WiFi module ID, and it can vary depending