User's Manual

117
Detail program description - Control adjust
the right touch pad (CLEAR) and then delete the value.
Complete the operation by briefl y tapping the center key
ESC on the left touch pad.
Changing reference point values
Move the joystick into the range of the reference point
that is to be changed: "L" (low), 1 … 4 or "H" (high).
The number and current curve value of this point are
displayed. Activate the value fi eld by briefl y tapping
the center
SET key on the right touch pad. The point
value fi eld is now highlighted and can be set within the
range -125% to +125%, and without infl uencing the
neighboring reference points.
Example:
2
+50%
–75%
–75%
Normal
off
Input
Output
Point
C1 Curve
Curve
In this sample screen image, reference point "2" has
been set to -75%.
Note:
If the joystick does not coincide with the exact reference
point, please note that the percentage value on the
"Output" line always relates to the current joystick
position.
Trim point function
Alternatively, assuming the value fi
eld is active, i. e.
highlighted, you can use the up or down arrow keys
ef on the left touch pad to jump to reference points
already set. In this case, a triangle is shown on the
graph to indicate each point jumped to. The arrow keys
on the right touch pad can then be used to change the
reference point jumped to as described above, entirely
independently of the control position:
2
+50%
–75%
–75%
Trim point
Normal
Input
Output
Point
C1 Curve
Exit from trim point function setting by tapping the center
key
ESC on the left touch pad.
Trim offset function
Assuming the value fi eld is active, i. e. highlighted, you
can not only use the up or down arro
w keys ef on the
left touch pad to jump to reference points already set
and change their values, but you can also use the cd
keys on the left touch pad to vertically reposition an
existing curve within the range ±25%:
1
0%
+50%
+50%
Trim offset
Normal
Input
Output
Point
C1 Curve
1
0%
0%
0%
Trim offset
Normal
Input
Output
Point
C1 Curve
You can also exit from this function by tapping the center
key
ESC on the left touch pad.
Trim x-axis function
This function is activated by tapping the left (e) or right
(f) arrow key on the right touch pad with an active
(i.
e. highlighted) value fi eld. You can then use the arrow
keys on the right touch pad to reposition the active point
horizontally or vertically as you wish.
?
0%
–33%
0%
Trim X-axis
Normal
Input
Output
Point
C1 Curve
Notes:
If you reposition the point horizontally further away •
from the current control position than approx. ±25%,
a "?" sign re-appears in the line. This question mark
does not refer to the repositioned point, how
ever:
instead, it signifi es that a further point can be set at
the current control position.
Please note that the percentage value on the •
"Output" line always relates to the current joystick
position and not to the position of the point.