User's Manual

13
Introduction - Remote control set
mc-32 HoTT technical data
Frequency band 2.4 … 2.4835 GHz
Modulation FHSS
Transmit power see country setting, page 225
Control functions 12 functions, 4 of these can
be trimmed
Temperature range -10 … +55 °C
Antennae collapsible
Operating voltage 3.4 … 6 V
Current draw about 800 mA
Dimensions about 252 x 250 x 59 mm
Weight about 1700 g with transmitter
battery
Accessories
Order No. Description
1121 Neck strap, 20 mm wide
70 Neck strap, 30 mm wide
3097 Hand transmitter wind protection
Teacher/pupil cable for mc-32 HoTT
see page 201
Replacement parts
Order No. Description
2498.4FBEC 4NH-2000 RX RTU fl at
33800 HoTT transmitter antenna
Technical data, receiver GR-24 HoTT
Order No. 33512
Operating voltage 3.6 … 8.4 V*
Current draw about 140 mA
Frequency band 2.4 … 2.4835 GHz
Modulation FHSS
Antenna Diversity antennas, 4
x about 145 mm long,
about 115 mm encapsulated
and about 30 mm active
Plug-in servos 16
Plug-in sensors 1
Temperature range about -10 … +55 °C
Dimensions about 62 x 31 x 14 mm
Weight about 26 g
* The specifi cation for permissible operating voltage range applies
only to the receiver. Please note in this context that receiver input
voltage is applied without regulation to connected servos but the
voltage range for most connectible servos (speed controls, gyros,
etc.) is only 4.8 to 6 V.
The Order No. 33124 set includes
Microcomputer transmitter mc-32 HoTT with built-
in NiMH transmitter battery 4NH-2000 RX RTU fl at
(change reserved), plug-in charger and Graupner
bidirectional receiver GR-24 HoTT.
Recommended charger units (accessories)
Order
No. Designation
Input voltage 220 V Input voltage 12 V
appropriate for
the following
batteries
integr. balancer NiCd NiMH LiPo lead battery
6411 Ultramat 8 xxxxx
6463 Ultramat 12 plus xxxxxx
6424 Ultramat 14 plus xxxxxxx
6466 Ultra Trio plus 14 xxxxxxx
6468 Ultramat 16S xxxxxxx
6469 Ultra Trio Plus 16 xxxxx x
6470 Ultramat 18 xxxxxxx
6475 Ultra Duo Plus 45 xxxxxxx
6478 Ultra Duo Plus 60 xxxxxxx
6480 Ultra Duo Plus 80 xxxxxxx
Transmitter charger cable, order no. 3022 and receiver charger cable,
order no. 3021 are also needed to charge batteries.
Other charger units and details about the listed chargers can be found
in the Graupner RC main catalog or in Internet at www.graupner.de.
Other accessories are listed in the appendix or can
be found in Internet at www.graupner.de. Feel free
to contact your dealer too. He will be glad to provide
advice.