User's Manual

158
Detail program description - Control adjust
0%
AILE
0%
+100%
+100%
fl.pos
Normal
Diff.
Ail-tr
AI
0%
FLAP
0%
0%
0%
fl.pos
Normal
Diff.
Ail-tr
AI
On this line, you set the aileron differential, plus the
diff
erential f
or the FLAP and FLAP2 wing flaps – if the
latter are being activ
ated as ailerons
.
0% (normal)
50% (differential)
100% (split)
AI
FL
FL2
FL2
FL
AI
If you are unsure about the meaning of differential travel,
please read the appropriate explanation at the start of
this section on page 148.
The adjustment range of -100% to +100% makes
it possible to set the correct direction of differential
regardless of the direction of rotation of the aileron and
fl ap servos.
If you tap the cd or ef keys on the right touch
pad (CLEAR) at the same time, this will reset values
changed in the active (highlighted) fi eld back to the
default value (see screen image).
fl .pos (wing fl ap position)
0%
AILE
0%
+100%
+100%
fl.pos
Normal
Diff.
Ail-tr
AI
0%
FLAP
0%
0%
0%
fl.pos
Normal
Diff.
Ail-tr
AI
Here, you set the fl ight phase-specifi c wing fl ap
positions f
or all of the flaps present on the model in
question.
In this w
a
y
, y
ou can specify the flap positions
that apply to each flight phase
.
The adjustment r
ange of -100% to +100% mak
es it
possible to set the correct direction of travel regardless
of the direction of rotation of the aileron and fl ap servos.
If you tap the cd or ef keys on the right touch
pad (CLEAR) at the same time, this will reset values
changed in the active (highlighted) fi eld back to the
default value (see screen images).
VFLV (Effects of fl ap controls)
In this line, you specify the percentage rate with which
the settings for input 6 (as made on the "Control
adjust" menu, page96, and potentially dependent on
fl ight phase) will affect the wing fl ap positions of the
aileron and camber-changing fl aps.
0%
0%
0%
AILE
0%
+100%
FL
fl.pos
Normal
Diff.
Ail-tr
0%
+100%
+100%
FLAP
0%
0%
FL
fl.pos
Normal
Diff.
Ail-tr
For each fl ap pair, you can defi ne either a symmetrical
or an asymmetric effect. Position the transmitter control
accordingly – either centrally or to the relevant side.
If you leave (or have left) each tra
vel adjustment at
+100% on the "Control adjust" menu (page 96), then
values between 5% and 20% should generally be
suffi cient.
If you tap the cd or ef keys on the right touch
pad (CLEAR) at the same time, this will reset values
changed in the active (highlighted) fi eld back to the
default value (see screen images).
Note:
By default, NO transmitter control is assigned to input 6