User's Manual

19
Operating notices
Joystick restoring force
The joystick's restoring force can also be adjusted to the
pilot's preference. The adjustment is located next to the
return springs, see markings in the fi gure below.
Spring force for the given direction of motion can be
adjusted by turning the respective screw with a Phillips
screwdriver.
Right turn (clockwise) = return harder,•
Left turn (counter clockwise) = return softer.•
horizontal
horizontal
vertical
vertical
Notice:
The aggregate for the right joystick is a mirror image of
the left joystick so corresponding screws for the right
joystick are located to the right of the middle.
Brake spring and ratchet
The outboard screw of the two marked in the next fi gure
adjusts the braking force and the inboard screw adjusts
the strength of the ratchet for the respective joystick.
Notice:
The aggregate for the right joystick is a mirror image of
the left joystick so corresponding screws for the right
joystick are located at the top left.