User's Manual

224
Detail program description - Control adjust
Using the arrow keys of the left or right touch pad, scroll
to the "Basic Settings" menu item of the multifunction
menu:
Telemetry
info display
Basic settings
Servo display
Servo test
Code lock
By briefl y pressing the central SET key of the right touch
pad, this menu item opens:
Batterie type
Batterie warning
Touch Sense
Contrast
Ni-MH
Display light
Region
Voice volume
2
4.7V
0
Euro
3
unlim.
Beep volume 3
BASIC SETTINGS
Own
Stick mode 1
DSC Output
PPM10
Pitch min
back
Power-on beep
yes
Power on warn.
unlim
General basic settings are entered in this menu …
specifi c to the transmitter, such as the owner's name
and defaults for new model memories.
The settings saved in this menu in the lines ...
"Stick mode",•
"DSC Output",•
"Pitch min"•
… have no infl uence whatsoever on already existing
model memories; they are only defaults, which are
automatically adopted to newly initialized model
memories and can be changed there on an individually
basis at any time in the "Basic model settings"
and "Helicopter type" menus. A change to the
"specifi cations" in this menu, therefore, only infl uences
model memories created at a later time.
Notice:
Settings in this menu are only assigned once for
transmitters. After opening this menu in another model
memory, therefore, the last valid settings always appear.
Select the appropriate line with the arrow keys cd of
the left or right touch pad and then press the central
SET key of the right touch pad. In the inverse value fi eld
you can now change the respective specifi ed value with
the arrow keys of the right touch pad and complete your
entry by pressing the central
SET key of the right touch
pad or the
ESC key of the left touch pad.
Own(er)
H.J.Sandbrunner
1
PPM10
BASIC SETTINGS
Own
Stick mode
DSC Output
Pitch min back
Up to 15 characters can be used to specify the owner's
name
.
Change to the ne
xt screen page (
) by
pressing the SET key of the right touch pad:
!"#$%&’()+,–./012
3456789:;
Owner
H-J Sandb
FGHIJKLMNOPQRSTUVWX
YZ[¥]^_`ab cdefghijk
?@ABCDE
Select the desired characters with the arrow keys of
the left touch pad. Switch to the next position by briefl y
pressing the arrow key f of the right touch pad of the
SET key to be able to select the next character. A blank
space can be entered by simultaneously pressing the
keys cd or ef of the right touch pad (CLEAR).
You can reach any arbitrary character position within the
input fi eld with the ef keys of the right touch pad.
You return to the previous menu page by briefl y pressing
the central
ESC key of the left touch pad.
S t i c
k mode (specifi cation)
As a basic principle, there are four different ways to
assign the four control functions, aileron, elevator,
rudder and throttle or br
ake fl aps for winged models as
well as rolling, pitching, tail rotor and throttle/pitch for
helicopter models to the two joysticks. The model pilot
determines which way to do so according to individual
preferences.
With the arrow keys cd of the left or right touch pad,
select the "Stick mode" line. The selection fi eld is shown
in a box:
General settings
Basic transmitter settings