User's Manual

226
Detail program description - Control adjust
"rear": minimum rear pitch setting, the pitch joystick
(C1) points towards the pilot.
Simultaneously pressing the keys cd or ef of the
right touch pad (CLEAR) switches to "rear"
Notice:
The stick mode of the C1 joystick in the winged model
program for "Throttle min front/rear" can be individual
changed in the "Model type" menu.
Contrast
In order to guarantee the optimal visibility of the display
of the mc-32 HoTT in any weather and at any
temperature, you can adjust its contrast:
GRAUBELE
#01
2:22h
Stop
Flt
«normal »
K78
0:00
0:00
5.5V
5.2V
M
HoTT
GRAUBELE
#01
2:22h
Stop
Flt
«normal »
K78
0:00
0:00
5.5V
5.2V
M
HoTT
For this purpose, using the arrow keys cdof the left or
right touch pad, select the "Contrast" line:
1
SEL
PPM10
0
Contrast
BASIC SETTINGS
Stick mode
DSC Output
Pitch min
back
Then briefl y press the central SET key of the right touch
pad. Now you can adjust the display contract in a range
of ±20 using the arrow keys of the right touch pad in the
inverse value fi eld.
Simultaneously pressing the arro
w keys cd or ef
of the right touch pad (CLEAR) resets the inverse fi eld
to "0".
Display light
In this line you can determine how long the backlight of
the display should remain switched on after switching on
the transmitter or the last key actuation.
The available options are "unlim(ited), "30 s", "60 s" and
"120 s".
Simultaneously pressing the arrow keys cd or ef
of the right touch pad (CLEAR) sets the inverse fi eld to
"unlimited".
Power-on beep
In this line you can switch the power-on beep of the
transmitter on ("yes") and off ("no").
Simultaneously pressing the arrow keys cd or ef
of the right touch pad (CLEAR) switch the inverse fi eld
back to "yes".
Battery type
SEL
0
Ni-MH
Battery type
Contrast
Display light unlim.
BASIC SETTINGS
Power-on beep
yes
In this line you indicate to the transmitter whether its
power supply is provided from a four-cell NiMH battery
or a single-cell LiPo battery. Depending on this setting,
you are offered a suitable voltage range in the (next) line
"Battery w
arning".
Simultaneously pressing the arrow keys cd or ef of
the right touch pad (CLEAR) switches back to "Ni-MH"
in the inverse fi eld.
Battery warning threshold
SEL
Ni-MH
4.7V
Battery type
Battery warning
Display light
unlim.
BASIC SETTINGS
Power-on beep
yes
You can arbitrarily specify the warning threshold for the
display ...
battery
needs
charging
… – depending on the selection of the battery type in
the line above it – in increments of 0.1 volt between 4.5
and 5.5 V (NimH battery) or 3.4 and 4.2 V (LiPo battery.