User's Manual

35
Transmitter description - Telemetry data display
appendix or in Internet at www.graupner.de in the web
page for the given product.
Depending on how this module is equipped with
sensors, this screen can permanently display the data
shown in the table below.
The current voltage of up to two batteries (BAT1
and BAT2), the measurement results of up to tw
o
temperature sensors (T1 and T2) and a fi ll level gage for
the fuel tank.
An alternating display along the screen's right edge will
display a list of current cell voltages for a LiPo battery
with up to six cells or operational data (current altitude
with respect to the starting location, ascent/decent m/1 s
and m/3 s, current current being drawn in amperes and
current voltage of the battery connected to the sensor).
The displayed items are as follows:
Value Explanation
BAT1 / BAT2 battery 1 or 2
FUEL fuel level / tank gage
E / F empty / full
T1 / T2 temperature of sensor 1 or 2
CELL V voltage of cells 1 … 6 (6 max)
ALT current altitude
0m1 m/1 s ascent/decent rate
0m3 m/3 s ascent/decent rate
A current draw i amperes
V battery voltage