User's Manual

84
Detail program description - Model type
infl uence any mixer available for "Brake settings" in
the "Wing mixers" menu. This free travel ensures that,
even if the brake fl ap control is not quite positioned to
its full end of travel, it will still stop all brake settings at
"neutral". At the same time, the effective control path is
automatically spread to 100 %.
Tip:
Preferably, the servo intended for operating any airbrake
fl aps that may be on the model should be connected to
the receiver output operated by the brake input channel,
e. g. connect airbrake servo onto (free) receiver output 8
if input 8 has been chosen for the "brake", etc. A second
airbrake servo is most conveniently operated by way of
a free mixer.