Operation Manual

Selecting the Modulation Mode Establishing the Model Type Transmitter Stick Functions for Channels 1…4
(access via System Menu) (access via System Menu) (access via System Menu)
System Menu 15
MODULATION MODE MODEL TYPE CONTROL MODE
The first option in the System Menu is to set the type
of modulation. This varies depending on the type of
receiver you will be using. The mc-12, mc-18, mc-20
and DS 20 mc are PCM types (Pulse Code
Modulation) and are used with the transmitter set to
PCM modulation. This is indicated by a letter “C” in
the display. For FM (Pulse Position Modulation)
receivers the transmitter must be switched to FM
(PPM) operation, and the display will show an “F”.
Switch from one to the other by pressing the INC or
DEC buttons.
The mc-16/20’s Multisoft program differentiates between five
different types of model. The selection must be made before re-
programming a model using the Set-Up Menu (see later) because
the menu determines which options can be called up by the Type.
A summary of the five ready-made multi-function programs is on
pages 26 – 27.
Your reach this code using the ROLL UP button. Five model
types are available, each selected with the INC or DEC buttons.
If you change the current model type using the INC / DEC
buttons the new model type will flash in the display. It is not
adopted until you confirm the selection with ENTER ( ROLL UP
+ ROLL DN ). When you confirm the selection, all the options in
the Set-Up Menu will change accordingly. All the original set-up
parameters of this memory will be lost when changing model type.
If necessary, you can return to the current model by pressing the
INC , DEC or CLEAR buttons before you press enter.
Summary of the ready-made multi-function programs
Activate the System Menu and select “MOD” by
pressing the ROLL UP (or ROLL DN ). You can now
change to mode 1 – 4 using the INC or DEC
buttons. All other functions are automatically
matched to the stick mode you have selected.
Stick Modes – Fixed-Wing Aircraft
Stick Modes – Helicopter (see page 66)
Throttle = Collective Pitch Elevator = Pitch
Aileron = Roll Rudder = Tail Rotor