Operation Manual

Set-Up Menu
Selecting and Adjusting the Flow Diagram of Set-Up Menu (Partial View)
Program Settings
(includes only those functions which are common to all model types)
Set-Up Menu 19
Switch on the transmitter and press ENTER to
switch to the Set-Up Menu program. (If the System
Menu is active, press ENTER twice).
The Multi-Data Information Display now switches
from the basic information (normal operation or
stopwatch) to the Set-Up Menu, and you will see the
last selected function from this menu on the screen.
If you wish to adjust a different function you should
press ROLL UP or ROLL DN repeatedly (or hold it
down) until the required function appears in the
display.
You can switch to the channel (CH) or to any allowed
sub-routine you want to adjust by pressing the CH
SEL or the  button.
The actual values are always adjusted using the
INC or DEC buttons, or a 2-way momentary switch
(Part No 4160.44) if fitted. The switch is connected to
the INC and DEC sockets on the transmitter circuit
board. We strongly recommend installing the switch
if you want to be able to alter parameters while you
are flying / operating your model aircraft, boat or car.
The adjusted values are automatically stored in the
model memory once you press ENTER , or change
to the next code.
The menu can be left at any time by pressing
ENTER . For the sake of clarity, we will describe only
those functions which are available for all model
types, and which are listed in the flow diagram. The
multi-function programs for model aircraft are
described in their own sections.
Normal Display Transmitter in Set-Up Menu
mode. The display shows
the last selected function