Operation Manual

General Section 5
• Sub Trim system for the neutral adjustment of all
Servos and adjustment of older makes of servos
with inconvenient neutral.
• Servo Throw (adjustment of full servo travel)
adjustable between 0 and 160%. Allows setting
symmetrically or asymmetrically to allow the
servo to move more less in one direction
• Reverse function for all Servos.
• Differential mixer for ailerons.
• Selector for the easy switching of the control
mode 1... 4 (throttle on the right left).
• Switchable modulation system PPM or PCM.
PCM operation is only possible with the receivers
mc-12, mc-18, mc-20 and DS 20-mc.
• High security by precise digital display of the
operational data.
• Integrated computer alarm system.
• Stopwatch and alarm timer, linked to throttle stick.
• expandable with the Multi-Prop and NAUTIC-
Expert modules.
• Can use all proportional & switch modules as well
as external switches of FM 6014/4014 systems.
• Minimum switch computer concept. The system
automatically switches functions, for safety
reasons, if the beginner model constructor does
without the switch.
• Five simple, yet complex, fixed-wing multifunction
core programs, for F3A, F3B, F3C, F3D and F3E
(completely programmed multi-mixer units, which
can be stopped by using additional mixers
accordingly).
• Mixer for V-tail and delta models.
• Super helicopter program for normal swashplate,
HEIM, 120° systems or those with four linkages.
• Three freely programmable mixers.
mc-16/20
16 Channel Microcomputer Radio Control system
Sets
Part No. 4838* for the 35 MHz band
Part No. 4845* for the 40 MHz band
* In each case the transmitter battery, 9.6v / 1.4
Âh (Part No. 3407) needs to be added separately.
The sets contain
8 Channel Microcomputer ROTARYSOFT
mc-16/20
Transmitter, expandable to 16 channels.
HF Transmitter module of the appropriate frequency.
16 channel MINI-SUPERHET C 16 S of the
appropriate frequency.
Servo C 507
Switch harness
Pair of quartz crystals from the appropriate
frequency band.
Power supply for transmitters and receivers
Removable 9.6v batteries for transmitters
Part No.
3407 Varta RSE 9.6v / 1700mAh
3208 Sanyo KR 9.6v / 1300mAh
3210 Graupner 9.6v / 700mAh
3408 Varta RS 9.6v / 500mAh
Removable 4.8v batteries for receivers
Part No.
3465 Varta RSH 4.8v / 2000mAh
3448 Varta RSE 4.8v / 1700mAh
3464 Sanyo KR 4.8v / 1400mAh
3444 Varta RS 4.8v / 600mAh
3446 Varta RS 4.8v / 600mAh
3463 Sanyo AA 4.8v / 300mAh
1)
1)
For special applications (short time use)
Further 4.8v batteries see Graupner main catalogue.
For fitting into the battery carrier
(designed for recipient 4 batteries)
Part No.
3659 Varta RS 1.2v / 500mAh
3617 Graupner RS 1.2v / 500mAh
Accessory for transmitters (see pages 94 – 95)
Part No. 1127 Transmitter Carrier
Part No. 1125 Wide Strap
Part No. 3082 PROFI transmitter tray
Part No. 3087 PROFI transmitter protector
Spare Parts
Part No. 4300.6 Telescopic Transmitter Aerial
Short Helical Aerial
Can be screwed on in place of the telescopic aerial
contained in the Transmitter. See page 95.
Individual HF Transmitter modules
Part No. 4824.35 for 35Mhz band.
Part No. 4824.40 for 40Mhz band.
Individual Receiver C 16 S
Part No. 3867 for 35Mhz band.
Part No. 4067 for 40Mhz band.
Further accessories – see the appendix and
Graupner main catalogue.