Operation Manual

Spoiler  Flap Mixer
(access via Set-Up Menu)
50 Fixed Wing Models
SPOILER  FLAP
MIXER
With movement of the throttle/spoiler control stick
(control function 1) both aileron servos can be
adjusted for landing using the INC / DEC buttons
from 0 to ±125% (0% = mixer inactive).
A switch connected to socket 7 of the transmitter
board, allows this function to be changed between
two options "SF0" and "SF1" (spoiler  flaps).
The mixer must have the position, of control function
1, set that corresponds to normal flight, i.e. with the
spoilers retracted, and the ailerons in their neutral
position. The neutral point of this mixer is set after
calling the subroutine "SF OFFSET" by pressing the
CH SEL button: The spoiler control is moved into the
appropriate neutral position, normally the bottom
position of the control stick, and the CLEAR button is
pressed. The display will indicate the offset, being
the deviation from the control central position. The
offset is identical for both switching positions and
only needs to be set once.
Note
:
When Butterfly landing mode is wanted, codes 17 &
19 are used with both ailerons (flaperons) deflected
upward and the flaps extended downward.
When only using 1 flap servo, connect it to socket 6
on the receiver.