Operation Manual

Helicopter 79
Example:
1. Adjuster 1: Left stop, Adjuster 2: Maximum,
Gyro Mix at 100%
With the slider control 7 the gyro effect can be set anywhere from
"0" up to the maximum. During operation of the tail rotor control
the gyros effect has a linear reduction, where the "0" value is
reached at stick full travel position
.
2. Adjuster 1: 30%, Adjuster 2: Maximum,
Gyro Mix at 100%
The gyro effect can be varied with slider control 7 between the two
adjusted values. Automatic gyro gain takes place only down up to
the value set with adjuster 1.
3. Adjuster 1: Left stop, Adjuster 2: Maximum,
Gyro Mix at 60%
In contrast to example 1 the gain reduction is when the tail rotor
control stick has moved 60% of its travel.
4. Adjuster 1: 30%, Adjuster 2: Maximum,
Gyro Mix at 60%
The minimum gyro effect is reached with 60% stick deflection.
This is not, however, at "0" gain, as in the previous example, but
corresponds to the setting of adjuster 1 of the Gyro sensor.