Operation Manual

Nautic 85
Receiver Requirements
NAUTIC Multi-Prop Decoder
Part No. 4142
(Described on page 92)
Remark
For each NAUTIC Multi-Prop module a
NAUTIC Multi-Prop decoder is necessary.
Note
:
The NAUTIC Multi-Prop decoder extends
two proportional channels (1 servo each),
for a transmitter fitted with the NAUTIC
Multi-Prop module, to eight proportional
channels (4 servos each).
For a trouble free function at least three
of the four possible servos should be
attached to the NAUTIC Multi-Prop
decoder.
An external power supply is not
necessary. The servos are supplied via
the receiver battery, which should be of
sufficient capacity, e.g. 4.8V / 1.4Ah,
Part No. 3448.