Operation Manual

NAUTIC Multi-Prop and Expert Switch Modules
Only available in PPM Mode
88 Nautic
Optional Transmitter Module
NAUTIC Multi-Proportional Module
Part No. 4141
(Described on page 92)
16 Channel NAUTIC Expert Module
Part No. 4108
(Described on page 92)
Function Notes
In the case of using a combination of
NAUTIC Expert and NAUTIC Multi-
Prop modules, 2 channels (sockets
CH7 and CH8 on the transmitter
board) are extended to 16 switched
outputs and 4 proportional channels (4
servos). The connection of both
modules takes place as previous
described on pages 84 and/or 86.
Receiver Requirements
Part No. Module Comments
4142 NAUTIC Multi-Prop Decoder 4 servos connected
4159 2-16 channel NAUTIC For 16 switch functions
Expert Switch Module
3941.6 Socket with 3-core lead For connection of devices
max. 0.7 A per signal path
3939 or Y-Lead 320 with 100 mm For connection of NAUTIC
3936.1 cable length Switch or Dual-Switch modules
3754.1 NAUTIC Switch module Direct connection or
via a Y-Lead
3754.2 NUATIC Dual-Switch Connection 2 channels
via a Y-Lead
 Connection of the modules to the transmitter board