User's Manual

78
Description of radio control set
mx-10 Computer System
Five-channel radio control set with Graupner HoTT 2.4 GHz technology (Hopping Telemetry Transmission)
Graupner HoTT technology offers excellent reliabi-
lity in use, with bi-directional communication bet-
ween transmitter and receiver, integrated telemetry
(with the optional Smart-Box) and ultra-fast respon-
se times.
Simplifi ed programming technology with „Jumpers“.
Micro-computer radio control system exploiting the •
latest Graupner HoTT 2.4 GHz technology
Bi-directional communication between transmitter •
and receiver
Ultra-fast response times through direct, ultra-reliable •
data transmission from the main processor to the 2.4
GHz RF module.
Telemetry menu (with the optional Smart-Box) for •
displaying telemetry data, and programming receiver
outputs and optional sensors.
Short, folding aerial•
Easy programming and accurate setting with toggle •
switches and a switch key
3 switches: a three-position switch for Trainer/pupil-•
mode, 2 two-position switches for dual rate and
channel 5 are already built
5 control functions, including 1 switching channel•
Servo reverse•
Mode selector for simple switching between stick •
MODES 1 ... 4 (throttle left / right, etc.) All applicable
settings are automatically converted.
Wing menu: 1 Ail, 2 Ail, V-tail, delta/fl ying wing•
The following settings can only be done via the optional
Smart-Box:
User-selectable servo cycle times for digital servos, •
min. 10 ms
Servo-control ± 150% for all servo outputs can be set •
separately for each side (Single Side Servo Throw)
Sub-trim in the range of ± 125% to adjust the neutral •
position of all servos
General features of the HoTT system
Simple, ultra-fast binding of transmitter and receiver•
Multiple receivers can be bound per model for paral-•
lel operation
Extremely fast re-binding, even at maximum range•
Two-receiver satellite operation using special cable •
connection
131
Appendix
PRX (Power for Receiver)
Order No. 4136
A highly developed stabilised receiver power supply with intelligent
power management.
The unit constitutes a stabilised user-selectable power supply for the
receiver, and provides a further enhancement in the reliability of the
airborne power supply. It is designed for use with different types of
receiver battery, to ensure that it is straightforward and versatile in use.
When the model is operating, even brief collapses in battery voltage
are stored and displayed, offering the user the means of detecting a
receiver battery which is not “up to the job”, or failing.
For use with one or two receiver batteries (simultaneous discharge if •
two batteries are employed)
Suitable for fi ve-cell or six-cell NiMH batteries, or two-cell LiPo or •
LiFe packs. Graupner/JR, G3.5, G2 and BEC connector systems.
Three user-selectable receiver power voltage levels: 5.1 V / 5.5 V / •
5.9 V.
Two ultra-bright LEDs indicate the operational status of batteries 1 •
and 2 separately.
Integral high-quality On / Off switch.•
Constructed to cope with high-current applications.•
Low-profi le switch and LEDs to avoid spoiling the appearance and •
effi ciency of the model.
Straight-through design of mounting lugs, LEDs and switch for simp-•
le installation using drilling template (supplied).
Appendix
Graupner HoTT Vario module
Order No. 33601
Vario with altitude signals and fi ve different tones for climb and
descent; altitude display and storage of min. and max. altitude.
Additional warning thresholds for min. altitude, max. altitude, two-sta-•
ge climb and descent rate
Variable warning time: OFF, 5, 10, 15, 20, 25, 30 seconds, constant•
Variable warning repeat time: constant, 1, 2, 3, 4, 5 min, once•
The vario sensor can be connected directly to the receiver’s teleme-•
try input.
Specifi cation
Altitude measurement: -500 m ... +3000 m•
Resolution: 0.1 m•
Sensitivity, vario: 0.5 m/3s, 1 m/3s, 0.5 m/s, 1 m/s, 3 m/s, program-•
mable per beep
Calculated average value: 4 - 20 measurements per measured •
value, programmable
Graupner HoTT GPS / Vario module
Order No. 33600
Vario with altitude signals and fi ve different tones for climb and
descent, plus GPS with range measurement, distance measurement,
speed indicator, display of fl ight direction and co-ordinates
Additional warning thresholds for min. altitude, max. altitude, two-sta-•
ge climb and descent rate
Altitude display, storage of min. and max. altitude•
Variable warning time: OFF, 5, 10, 15, 20, 25, 30 seconds, constant•
Variable warning repeat time: constant, 1, 2, 3, 4, 5 min, once•
The GPS / Vario sensor can be connected directly to the receiver’s •
telemetry input.
Specifi cation, vario
Altitude measurement: -500 m ... +3000 m•
Resolution: 0.1 m•
Sensitivity, vario: 0.5 m/3s, 1 m/3s, 0.5 m/s, 1 m/s, 3 m/s, program-•
mable per beep
Calculated average value: 4 - 20 measurements per measured va-•
lue, programmable
33110_mx10_HoTT_1_DE.indd Druckbogen 78 von 104 - Seiten (78, 131)
33110_mx10_HoTT_1_DE.indd Druckbogen 78 von 104 - Seiten (78, 131)
21.10.2011 13:24:57
21.10.2011 13:24:57