User's Manual

114
Program description: basic settings
Use the arrow buttons of the left or right-hand four-way
button to leaf through to the “basic settings” menu point
of the multi-function menu:
mod. mem.
servo set.
D/R expo
wing mixer
base sett.
contr set.
phase trim
free mixer
servo disp basic sett
fail-safe
telemetry
Press the central SET button of the right-hand four-way
button to open the menu point:
Batt type
Batt warning
Touch Sense
Contrast
Ni-MH
Display light
RF Country
Voice volume
2
4.7V
0
Euro
3
unlim
Beep volume 3
In this menu you can enter basic settings which are
specifi c to the transmitter.
Note:
Settings in this menu only need to be entered once, and
apply to the whole transmitter. This means that the last
valid settings always appear when you call up this menu
from another model memory.
Use the arrow buttons cd of the left or right-hand
four-way button to select the appropriate line, then press
the central SET button of the right-hand four-way button.
The v
alue fi eld is now highlighted (black background),
and you can use the arrow buttons of the right-hand
four-way button to alter the default value. Pressing the
central SET button once more concludes the entry
process.
Battery type
Batt type
Batt warning
Contrast
Touch Sense
4.7v
0
2
Ni-MH
Display light unlim
In this line you inform the transmitter whether its power
is to be dr
awn from a four-cell NiMH battery or a single-
cell LiPo battery. The voltage range offered in the (next)
line “Battery warning threshold” will vary according to
this setting.
Simultaneously pressing the arrow buttons cd or ef
of the right-hand four-way button (CLEAR) resets the
value in the highlighted fi eld to NiMH.
Battery warning threshold
Batt type
Batt warning
Contrast
Touch Sense
4.7v
0
2
Ni-MH
Display light unlim
In this line you can enter any voltage you like …
battery
needs
charging
… within the range 4.5 to 5.5 V (NiMH battery) or 3.4 to
4.2 V (LiPo battery) - according to your choice of bat-
tery type - in increments of 0.1 Volt. However, never be
tempted to enter too low a value here, to ensure that you
always have ample time to land your model safely if a
battery warning should be triggered.
Simultaneously pressing the arrow buttons cd or ef
of the right-hand four-way button (CLEAR) resets the
value in the highlighted fi eld to 4.7 V or 3.4 V respec-
tively.
Button response
Batt type
Batt warning
Contrast
Touch Sense
4.7v
0
2
Ni-MH
Display light unlim
In this line you can select the speed of response of the
f
our-way buttons within the range 1 to 10.
The higher the set value, the longer the button has to be
pressed before the software responds.
Simultaneously pressing the arrow buttons cd or ef
of the right-hand four-way button (CLEAR) resets the
value in the highlighted fi eld to “2”.
Contrast
You can adjust the contrast of the mx-12 HoTT’s in-
tegral screen to optimise its legibility in varying weather
and temperatures:
Basic settings
33112_mx12_HoTT_2_GB.indd Abs39:11433112_mx12_HoTT_2_GB.indd Abs39:114 06.06.2011 19:39:4206.06.2011 19:39:42