User's Manual
12
Description of radio control set
Four switches (two three-way switches, one two-way •
s
witch and one momentary switch), plus two digital
controls - already installed and extremely versatile
Unrestricted assignment of all switches to switched •
functions simply by operating the appropriate switch
Storage of model memories using the latest battery-•
free back-up system
Six control functions with simplifi ed, very convenient •
assignment of transmitter controls for auxiliary func-
tions, such as switches and proportional controls
Convenient mode selector provides simple method •
of changing the stick mode (modes 1 - 4, e. g. throttle
right / throttle left).
When you change modes, all the affected settings
are switched at the same time.
Graphical servo display provides a straightforward •
overview of the servo set-up, and a swift method of
checking servo travels
Receiver output swap•
Comprehensive programs for fi xed-wing model •
aircraft and helicopters:
Fixed-wing menu for: 1 AIL, 2 AIL, 2 AIL + 2 FLAP, V-
tail, delta / fl ying wing, two elevator servos
Fixed-wing mixer: diff aile, diff.fl aps, ail ¼ rudd, ail
¼ fl aps, brake ¼ elev, brake ¼ fl ap, brake ¼ aile,
elev ¼ fl ap, elev ¼ aile, fl ap ¼ elev, fl ap ¼ aile
and diff. reduction
Heli menu: 1-point, 2-point, 3-point and 4-point •
linkages (1 servo, 2 servo, 3sv(2roll), 3sv(140°),
3sv(2nick (pitch-axis)), 4 SV (90°))
Swashplate limiter•
Servo travel adjustment +/- 150% for all servo out-•
puts, variable separately for each side (Single Side
Servo Throw)
Variable sub-trim, range +/- 125%, for adjusting the •
neutral position of all servos
Servo reverse, programmable for all servos•
EXPO / DUAL-RATE system, separately variable, can •
be switched in-fl ight, fl ight phase programmable
Stopwatch / count-down timer with alarm function•
Model memory copy function•
Integral DSC socket for use with fl ight simulators and •
Trainer systems
General features of the HoTT system
Simple, ultra-fast binding of transmitter and receiver•
Multiple receivers can be bound per model for paral-•
lel operation
Extremely fast re-binding, even at maximum range•
Two-receiver satellite operation using special cable •
connection
Range-check and warning function•
Receiver low-voltage warning on transmitter screen•
Ultra-wide receiver operating voltage range: 3.6 V to •
8.4 V (fully operational down to 2.5 V)
Fail-Safe•
Unrestricted channel assignment (channel-mapping), •
mixer functions and all servo settings programmable
in the Telemetry menu
Up to four servos can be actuated simultaneously •
as a block, with a servo cycle time of 10 ms (digital
servos only)
Optimised frequency hopping and broad channel •
spread for maximum interference rejection
Intelligent data transmission with corrective function•
Real-time telemetr
y analysis•
More than 200 systems can be operated simultane-•
ously
Future-proof update capability using data interface•
mx-12 Computer System
Six-channel radio control set with Graupner HoTT 2.4 GHz technology (Hopping Telemetry Transmission)
33112_mx12_HoTT_2_GB.indd Abs4:1233112_mx12_HoTT_2_GB.indd Abs4:12 06.06.2011 19:39:2606.06.2011 19:39:26