User's Manual

130
Program description: Telemetry menu
RX + GPS
N
RXSQ 0
DIS 0m
ALT +500m
0m/1s
0m/3s
0m/10s
N 0°00.0000
E 0°00.0000
W
E
S
Kmh
0
If a GPS module with integral vario, Order No. 33600,
is connected to the receiver, then this screen provides
a graphic display of the data supplied by it. For more
information on this module please see the Appendix, or
refer to the product on the Internet at www.graupner.de.
The centre of the screen shows the current positional
data and the model’s speed; the display also shows the
model’s current altitude in relation to the launch point, its
climb / descent rate at m/1 sec, m/3 sec and m/10 sec,
the current reception quality and the model’s range from
the launch point.
The meanings are as follows:
Value Explanation
W / N / E / S West / North / East / South
Kmh Speed
RXSQ Signal strength of downlink channel
DIS Distance
ALT Current altitude relative to launch point
m/1s m/1 sec climb / descent
m/3s m/3 sec climb / descent
m/10s m/10 sec climb / descent
RF STATUS VIEW
Select the desired menu line with the arrow buttons
cd of the left or right-hand four-way button …
TELEMETRY
SETTING & DATA VIEW
SIMPLE DATA VIEW
RF STATUS VIEW
VOICE TRIGGER
… and then press the central SET button of the right-
hand four-way button to open the selected sub-menu:
R100%
TD 22
E 10
RD 41
4.8VC
S 95%
4.8VM 0123456789ABCDE
Top row: receive performance in dBm of channels
1 ... 75 on the 2.4 GHz band.
Bottom row: receive performance in dBm of the sig-
nal of channels 1 ... 75 on the 2.4 GHz
band, as picked up by the receiver.
This screen provides a graphic display of data showing
the occupation of the 2.4 GHz band.
As well as the graphic depiction of band occupation,
additional numeric information is generated to the left of
the graphs. The meanings are as follows:
Value Explanation
R Signal quality in % for the signal
arriving from the receiver
S Signal quality in % for the signal
arriving at the receiver
TD Reception performance in dBm
E Number of lost receiver data packets
RD Reception performance in dBm of the
signal picked up by the receiver
VC Actual receiver operating voltage in
Volt
VM Lowest receiver operating voltage in
Volt since the last time it was switched
on
RF STATUS VIEW
33112_mx12_HoTT_2_GB.indd Abs45:13033112_mx12_HoTT_2_GB.indd Abs45:130 06.06.2011 19:39:4406.06.2011 19:39:44