User's Manual

176
Appendix
Graupner HoTT Smart-Box
Order No. 33700
A vast range of different functions combined in a single device: that’s
what destines the SMART-BOX to be your intelligent companion in
future. Whether you want to display telemetry data in real time, or
enter changes to your HoTT system, the large-area screen with 8 x 21
characters makes the task simple. The fl exible Smart-Box includes an
integral buzzer for generating audible signals and warnings for even
greater fl exibility and practicality.
The installation set supplied makes it easy to mount the unit on the
support bars of hand-held transmitters, allowing you to position it in
such a way that you can read off telemetry data in real time while you
control your model.
The user-update facility ensures that the SMART-BOX is always up-to-
date, and provides a route for expanded functions in future.
Transmitter voltage display with •
user-variable warning threshold
Country setting•
Range check• Signal quality•
Receiver temperature• Receiver voltage•
Servo reverse• Servo neutral position•
Servo travel• Cycle time•
Channel swap• Fail-Safe settings•
Mixer settings• Servo test•
Dimensions: approx. 76 mm x 72 mm x 17 mm (L x W x H)
Weight: approx. 55g
Graupner HoTT RPM magnet sensor
Order No. 33616
Graupner HoTT RPM optical sensor
Order No. 33615
Optional speech output module for Graupner mx-12 HoTT
Order No. 33001.71
This optional module forms the output device for the transmitter’s
audible signals as well as the signals and speech output associated
with the Telemetry menu. All speech output is in the German language
as standard.
To use the module you will also need standard headphones or an
earphone with a 3.5 mm barrel connector, which can be purchased
from any electrical retailer.
The volume of the earphone socket can be adjusted in the “Voice
volume” line of the “General settings” menu; see page 115.
33112_mx12_HoTT_2_GB.indd Abs49:17633112_mx12_HoTT_2_GB.indd Abs49:176 06.06.2011 19:39:5606.06.2011 19:39:56